Posted on: 27 November, 2019
Author: Nancy Whitman
With construction sites, the one thing that is happening all the time is sediment and erosion. This happens because of the disturbance of the site and ground. However, there are some countries that have strict rules and regulations about the need to implement sufficient sediment and erosion control solutions when they are working on a construction site. Controlling erosion on a construction site is important for the stability of the building, in the short term and long term. You need to make sure that you consider all these before you just start building and causing damage to the construction site. Erosion on construction sites do happen often Yes, erosion and sediment really do happen on construction sites. Especially if the contractors don’t really care about the surrounding ground. Erosion can be causing long-term and short-term damage to the environment if they don’t consider it carefully. Even, if you know that erosion can happen, it doesn’t mean that now you don’t need to care anymore. With a bit of care, it is possible to limit the erosion on any type of construction site. Try to eliminate the damage caused to construction zones You as the contractor should try to minimize the disturbed area. Making sure that you reconsidering the fact that erosion can happen in your building area, and this can be dangerous. The first thing that you can do, minimizes the disturbed area. The area where you are going to work first. If you are making the whole land flat, you are going to have problems with disturbed areas that were illegal to do. And, you will not cause damage in the long run, to Mother Earth. Only disturb the area where you are going to start building. Make use of concrete blocks This is one of the best ways on how contractors are making sure to prevent erosion on a construction site. They are making use of concrete blocks, also known as Gabion baskets and rock mattresses (including Melbourne). These concrete blocks are getting placed at strategic places to ensure that erosion can’t take place during rain or storms. Once the construction is finished, the concrete blocks are removed again, and the ground is stabilized. This is why there are always concrete blocks at building sites. Especially, if this is large building sites. We always think that this is so that we can’t see what is going on behind the blocks. However, this is actually to prevent erosion from taking place. Soil nails Soil nails are also a great method that can be used to prevent erosion on a construction site. However, this isn’t as popular to use with the concrete blocks. This is also not as effective during huge storms that can cause huge erosion that can damage the environment and the ground surrounding the site. Making it hard to recover after the construction is done. Soil nails are huge nails that are getting slammed into the ground. This is used especially on slopes, to ensure that it can’t cause the slopes to collapse and cause damage to the people on the bottom of the slope. Holding the soil in place From all these methods, there is an easier method. To hold the soil in place around the construction. This is the easiest and best way to ensure that the ground won’t have a risk of erosion during the construction and just after the construction. There are easy ways on how you control and manage sediment and erosion on a construction site. An effective solution for preventing erosion that occurs with sloped terrain is known as Concrete Canvas (including Melbourne). Some countries are forced to provide a plan to prevent erosion from happening during the construction. These are some of the best ways to make sure that the surrounding grounds stay safe and secure during construction. Article Tags: Construction Site, Concrete Blocks, Prevent Erosion, Soil Nails Source: Free Articles from ArticlesFactory.com Nancy Whitman is a contributor to leading Australian erosion and sediment control solutions provider, Advanced Environmental Services.